Redmi K50 Pro renders show the possible design of the device!

This may be the design of the Redmi K50 Pro, which will be introduced in the first quarter of 2022! Render is here!

SPONSORED

A lot of design leaks have been published about the Redmi K50 Pro. The most recent of these leaks was the leak of a case of the device. According to this case, the Redmi K50 Pro will have such a design. Of course, this is a concept design and the reality is different from this device. However, when we combine the leaked images, it seems to have such a design.

The Redmi K50 Pro has an angular design similar to the Redmi Note 11 Pro. The camera design is quite similar to the Xiaomi Civi. Although it may seem strange at first glance, it starts to look nice over time. This triple camera system has 64 megapixels Sony IMX686 main camera, 13 megapixels OV13B10 ultra-wide, 2MP GC02M1 or 8MP OV08A10 macro camera.

The Redmi K50 Pro will use the Snapdragon 8 Gen 1 processor. It will have AW8697 vibration motor. That vibration motor is also used in Xiaomi 12 series and base model MIX 5 device. The screen of the Redmi K50 Pro will be an AMOLED panel with a resolution of 1080×2400 pixels and a refresh rate that can be adjusted between 60-90-120Hz. This panel’s size is 6.67 inches . This screen will not have FOD technology. The fingerprint of the Redmi K50 Pro will be on the phone’s power button. Also, this device will not use the Surge P1 chip.

Leaked Redmi K50 Pro Case

According to this case photo circulating on Weibo, the Redmi K50 Pro will look very similar to the render design we created. However, when we think that the “Xiaomi 12 Ultra” cases circulating around are fake, there is a possibility that this case may be fake.

The Redmi K50 Pro is expected to be introduced this month. However, there are currently no Internal MIUI updates. The Redmi K50 series may be introduced in February.

SPONSORED